Equipped with the same 6½ inch paper/wood cone driver and hybrid tweeter module as the EUPHONIA MS4 and EUPHONIA CS4, the EUPHONIA RS3 is the perfect rear speaker in a EUPHONIA surround setup.
The RS3 will also function flawlessly as an on-wall front speaker matched with a subwoofer, which in the ultimate setup should be the EUPHONIA AS2.
As in all EUPHONIA´s, the cabinet is made of a special patented "Hornflex" cabinet material that eliminates vibrations and resonances in the cabinet.
The EUPHONIA Series is developed, designed, hand-built, assembled and individually tested at the DALI factory in Denmark.
|Frequency Range (+/-3 dB) [Hz]||64 - 28,000|
|Sensitivity (2,83 V/1 m) [dB]||87.0|
|Nominal Impedance [Ω]||4|
|Maximum SPL [dB]||108|
|Recommended Amplifier Power [W]||50 - 250|
|Crossover Frequency [Hz]||2,600 / (15,000)|
|High Frequency Drivers||1 x 10 x 55 mm Ribbon
1 x 29 mm Soft Textile Dome
|Low Frequency Driver||1 x 6½" Wood Fibre Cone|
|Enclosure Type||Closed Box|
|Dimensions With Base (HxWxD) [mm]||470 x 200 x 205|
|Accessories Included||Grille Hook