If your preference is compact stand-mounted speakers - and there are advantages compared to floorstanding loudspeakers - your choice is the Helicon 300.

The stand-mounted Helicon 300 has the same technical and high gloss lacquer features as the Helicon 800 and Helicon 400. 

Standing on its own luxurious dedicated stand or any stand of your choice, the Helicon 300 looks stunning and breathtaking. But looks do not do the whole job, Helicon 300 gives you the sound reproduction you would expect from a floorstanding loudspeaker.

The Helicon Series is developed, designed, hand-built, assembled and individually tested at the DALI factory in Denmark.





Product Series HELICON
Speaker Type Front
Frequency Range +/- 3 dB (Hz) 37 - 27.000
Crossover Frequencies (Hz) 3.400 / 13.000
Sensitivity (2.83 V/1m) [dB] 86.0
Nominal Impedance [Ω] 4.0 
Minimum Impedance [Ω] 4.3 
Maximum SPL [dB] 108 
Recommended Amp. Power [W] 50 - 200
High Frequency Drivers [mm] 1 x 25 Soft Dome
1 x 10 x 55 Ribbon
Low Frequency Drivers 1 x 6½"
Bass Reflex Tuning Frequency [Hz] 34.5 
Dimensions (HxWxD) [mm] 435 x 208 x 356
Weight [kg] (lb) 9.8 kg 
Finish High Gloss Cherry and Rosenut

HELICON_300 grill.png

You are about to leave this page

You are on your way over to our International page

Go to MyDALI Forum Close