Equipped with the same 6½ inch paper/wood cone driver and hybrid tweeter module as the EUPHONIA MS4 and EUPHONIA CS4, the EUPHONIA RS3 is the perfect rear speaker in a EUPHONIA surround setup.
The RS3 will also function flawlessly as an on-wall front speaker matched with a subwoofer, which in the ultimate setup should be the EUPHONIA AS2.
As in all EUPHONIA´s, the cabinet is made of a special patented "Hornflex" cabinet material that eliminates vibrations and resonances in the cabinet.
The EUPHONIA Series is developed, designed, hand-built, assembled and individually tested at the DALI factory in Denmark.
Please find the EUPHONIA RS3 brochure here and the EUPHONIA manual here.
Specifications:
| Product Series | EUPHONIA |
| Speaker Type | Rear Surround |
| Frequency Range (+/-3 dB) [Hz] | 64 - 28,000 |
| Sensitivity (2,83 V/1 m) [dB] | 87.0 |
| Nominal Impedance [Ω] | 4 |
| Maximum SPL [dB] | 108 |
| Recommended Amplifier Power [W] | 50 - 250 |
| Crossover Frequency [Hz] | 2,600 / (15,000) |
| High Frequency Drivers | 1 x 10 x 55 mm Ribbon 1 x 29 mm Soft Textile Dome |
| Low Frequency Driver | 1 x 6½" Wood Fibre Cone |
| Enclosure Type | Closed Box |
| Recommended Placement | On-Wall |
| Dimensions With Base (HxWxD) [mm] | 470 x 200 x 205 |
| Weight [kg] | 11.0 |
| Accessories Included | Grille Hook Manual Terminal Links |
| Finish | Alpi Veneer Cherry Veneer Maple Veneer |
