If you use smaller speakers in your music or movie setup, you will be surprised to hear how much the extra octave at the bottom will improve the total performance of your system. Correctly positioned and set the BASIS 100 will offer you a more tight and coherent bass - improving the overall listening experience.
The BASIS sub is easy to position in any room. As the bass port is placed at the bottom of the woofer there are no minimum requirements for the distance between the wall and the sub woofer. The amplifier has stereo inputs as well as LFE input. The level, crossover frequency, and phase can be adjusted. BASIS 100 also features an electronic circuit, which will automatically power up the subwoofer, if signals are
detected on the inputs. If no input signals are fed to the subwoofer for a while, the subwoofer will automatically go into standby-mode.
The cabinet is made of medium density fiber board (MDF). Underneath the subwoofer, there are four rubber feet, which will effectively prevent
vibration being transferred to the floor. Also, the distance from underneath the subwoofer to the floor (caused by the rubber feet) will make the airflow from the down firing bass reflex port possible.
BASIS 100 is an ideal subwoofer for smaller systems – e.g. with the smaller CONCEPT speakers or the smaller IKON® speakers.
|Frequency Range +/- 3 dB [Hz]||32 - 150|
|Nominal Impedance [Ω]||15.0k|
|Maximum SPL [dB]||109|
|Max. Amplifier Power Output [W]||130|
|Cont. IEC Power Output [W RMS]||100|
|Crossover Frequency [Hz]||40 - 120|
|Low Frequency Driver(s)||1 x 10” Long Throw|
|Enclosure Type||Bass Reflex|
|Bass Reflex Tuning Frequency [Hz]||32.5|
|Connection Input(s)||Mono Line Level LFE
stereo Line Level
|Standby Power Consumption [W]||1.5|
|Maximum Power Consumption [W]||175|
|Dimensions (H x W x D) [mm]||340 x 320 x 370|